Home · Real-Time Clocks · RA8901CE

RA8901CE
Real-time clock module by Epson

The RA8901CE is a real-time clock module from Epson with a built-in 32.768 kHz crystal — no separate watch crystal on the board, no load capacitance and layout risk. Interface I²C, package CE · 3.2 × 2.5 × 1.0 mm, standby current 350 nA typ., accuracy DTCXO, operating range on request. AEC — the automotive version of the RX8901CE.

I²CDTCXOAutomotivePower switchCE 3.2 × 2.5 × 1.0
InterfaceI²C
PackageCE · 3.2 × 2.5 × 1.0 mm
Standby current350 nA typ.
AccuracyDTCXO
Temperature rangeon request
Supplyon request
AvailabilityOn request — Epson release
Automotive version: delivery requires a separate release by Epson. Tell us the application and the annual demand and we will start the process.

What the RA8901CE can do

DTCXO

Digitally temperature compensated — the stated accuracy holds across the whole temperature range, not only at +25 °C.

Power switch

Detects the loss of the main supply and switches to the backup source on its own — compared with a diode-OR arrangement the MOS switch saves leakage current and voltage drop.

Automotive

AEC-Q100. Delivery only after separate release by Epson — we will start that process for you.

Order codes

We handle the order codes for this type on request — tell us tolerance grade, packing and annual demand and we will come back with availability and lead time.

Alternatives in the Epson programme

If the RA8901CE is not quite the right fit — these types come closest:

All 40 families with filters for interface, package, standby current and temperature: real-time clock finder.

Frequently asked questions about the RA8901CE

How accurate is the RA8901CE?

DTCXO. Because the device is digitally temperature compensated, that figure holds across the whole temperature range.

Is the RA8901CE AEC-Q100 qualified?

Yes. The type belongs to the automotive line. Delivery requires a separate release by Epson — we will start that process for you.

How much current does the RA8901CE draw in backup?

350 nA typ.. With a 225 mAh coin cell that is enough for many years of pure timekeeping on paper; the self-discharge of the cell usually becomes the limiting factor.

Which interface does the RA8901CE use?

I²C. Package: CE · 3.2 × 2.5 × 1.0 mm.

Where can I buy the RA8901CE in Europe?

Timing Devices Europe stocks the Epson RTC programme in its own warehouse in Ladenburg near Heidelberg, Germany — physically on site, not at the manufacturer. Samples, series demand and second-source assessment in one go, answered the same working day.

Samples and series demand

Enquire about the RA8901CE.

We stock the Epson RTC programme in our own warehouse in Ladenburg near Heidelberg, Germany. Tell us tolerance grade, packing, quantity and date — answered the same working day.

© 2026 Timing Devices Europe GmbHLadenburg near HeidelbergImprintPrivacy