Home · Real-Time Clocks · RA8804CE

RA8804CE
Real-time clock module by Epson

The RA8804CE is a real-time clock module from Epson with a built-in 32.768 kHz crystal — no separate watch crystal on the board, no load capacitance and layout risk. Interface I²C, package CE · 3.2 × 2.5 × 1.0 mm, standby current 350 nA typ. · 1500 nA max., accuracy ±3.4 ppm over −40 … +85 °C (DTCXO), operating range −40 … +105 °C. AEC-Q100 — the automotive version of the RX8804CE. No power switch.

I²CDTCXOAutomotiveTime stamps 1CE 3.2 × 2.5 × 1.0
InterfaceI²C
PackageCE · 3.2 × 2.5 × 1.0 mm
Standby current350 nA typ. · 1500 nA max.
Accuracy±3.4 ppm over −40 … +85 °C (DTCXO)
Temperature range−40 … +105 °C
Supply1.6–5.5 V
Tolerance gradesXA / XB
AvailabilityOn request — Epson release
Automotive version: delivery requires a separate release by Epson. Tell us the application and the annual demand and we will start the process.

What the RA8804CE can do

DTCXO

Digitally temperature compensated — the stated accuracy holds across the whole temperature range, not only at +25 °C.

Time stamps 1

Events are recorded with their time inside the device, without the MCU having to wake up for it.

Automotive

AEC-Q100. Delivery only after separate release by Epson — we will start that process for you.

Order codes and datasheets

Every order code has its own printable datasheet with all recorded figures.

TDE itemEpson designation
91-0010RA8804CE XA

Alternatives in the Epson programme

If the RA8804CE is not quite the right fit — these types come closest:

All 40 families with filters for interface, package, standby current and temperature: real-time clock finder.

Frequently asked questions about the RA8804CE

How accurate is the RA8804CE?

±3.4 ppm over −40 … +85 °C (DTCXO). Because the device is digitally temperature compensated, that figure holds across the whole temperature range.

Is the RA8804CE AEC-Q100 qualified?

Yes. The type belongs to the automotive line. Delivery requires a separate release by Epson — we will start that process for you.

How much current does the RA8804CE draw in backup?

350 nA typ. · 1500 nA max.. With a 225 mAh coin cell that is enough for many years of pure timekeeping on paper; the self-discharge of the cell usually becomes the limiting factor.

Which interface does the RA8804CE use?

I²C. Package: CE · 3.2 × 2.5 × 1.0 mm.

Where can I buy the RA8804CE in Europe?

Timing Devices Europe stocks the Epson RTC programme in its own warehouse in Ladenburg near Heidelberg, Germany — physically on site, not at the manufacturer. Samples, series demand and second-source assessment in one go, answered the same working day.

Samples and series demand

Enquire about the RA8804CE.

We stock the Epson RTC programme in our own warehouse in Ladenburg near Heidelberg, Germany. Tell us tolerance grade, packing, quantity and date — answered the same working day.

© 2026 Timing Devices Europe GmbHLadenburg near HeidelbergImprintPrivacy